7 Tesla Optical Cryostat Quantum Design OptiCool® The OptiCool by Quantum Design is a new optical cryostat using an innovative design that puts the sample volume in the heart of your optical environment. A custom 3.8 inch bore, split-coil, conical magnet offers fields perpendicular to the optical table up to ±7 tesla. The highly integrated design means, even with a magnet, your sample isn’t buried inside a large cryostat, far away from the optics. Seven side optical ports and one top optical port allow for optical access to your sample from a wide array of directions.

Direct Write "Maskless" Lithography Durham Magneto Optics MicroWriter ML®3 The MicroWriter ML3 products are a range of photolithography machines designed for rapid prototyping and small volume manufacturing in R&D laboratories and clean rooms. Conventional approaches to photolithography are usually based on exposing through a chromium-glass mask manufactured by specialist vendors. In R&D environments it is often necessary to change the mask design frequently. Direct-write lithography tools overcome this problem by holding the mask in software. Rather than projecting light through a physical mask, direct-write lithography uses computer-controlled optics to project the exposure pattern directly onto the photoresist.